Six seat sled, a nine seater sled is also available
The base platform is made with a sturdy steel chassis measuring mm. 1236×2393 (48-1/3″x94-1/4″) and an aluminum antiskid diamond-plate floorboard. The skis are made with zinc-coated steel; they have HD-PE skins for better gliding, carbide-steel runners.
The TRANSALP is a towing-sled platform system that can be configured in many different ways.
The base platform is made with a sturdy steel chassis measuring mm. 1236×2393 (48-1/3″x94-1/4″) and an aluminum antiskid diamond-plate floorboard. The skis are made with zinc-coated steel; they have HD-PE skins for better gliding, carbide-steel runners to prevent sideways sliding, and a comfortable progressive rubber suspension which acts like an “air-cushion” even on bumpy trails. The drawbar coupling system will fit over an automotive 50 mm ball-hitch installed on the SHERPA. Thanks to its large payload capacity (750 kgs/ 1655 lbs. in the MATERIAL 3-ski configuration) and its modular construction, the TRANSALP system is a very flexible piece of equipment for transportation, and can be configured as:
1) BUS trailer, with R.O.P.S. and 3+3 (or 3+3+3 as option) comfortable foam-seats, safety belts and luggage rack;
2) SKI SCHOOL trailer, specifically designed for ski schools, snow parks, ski areas, etc. with special fitting;
3) CUSTOM flatbed trailer, without side rails, for wide cargoes exceeding the platform size, or any other customization;
4) MATERIAL trailer, with perimeter rails (150 mm./5.90″ height) to contain and fasten any cargo.
Available on request a transparent wind-protection kit, including windscreen and hard-top, and/or the 10-pair ski-rack.
The TRANSALP SKI SCHOOL is a bus trailer with R.O.P.S. and 3+3 (or 3+3+3 as option) comfortable foam-seats, safety belts and a ski-rack (not displayed on the picture above) specifically designed for ski schools, snow-parks, ski resorts, hutten, etc.
The base platform is made with a sturdy steel chassis measuring mm. 1236×2393 (48-1/3″x94-1/4″) and an aluminum antiskid diamond-plate floorboard. The skis are made with zinc-coated steel; they have HD-PE skins for better gliding, carbide-steel runners to prevent sideways sliding, and a comfortable progressive rubber suspension which acts like an “air-cushion” even on bumpy trails. The drawbar coupling system will fit over an automotive 50 mm ball-hitch installed on the SHERPA. The TRANSALP SKI SCHOOL differs from the standard Transalp BUS in the pleasant plastic fittings with illustrations and logos and it is available with the standard fitting “ALPINALM Skischule – Scuola sci” as shown on the image. Anyway, it can be supplied on request with the mascot/logo and name of the ski area/ski school, etc. Also available on request a transparent wind-protection kit, including windscreen and hard-top, and/or the 10-pair ski-rack.